SieStorage manufactured by Siemens
Type of energy stored:
Electrochemical
Nominal capacity (kWh):
179.2
Nominal power (kVA):
240
Year of installation:
2015
Response time:
Less than 1 second
Self-discharge (%/month):
1-2
Efficiency (%):
85 – 95
Grid Voltage (V):
400
ESS communication system:
A dSPACE-based real-time controller guarantees the access to the measurements and allows the control of the ESS. The dSPACE box can be accessed remotely through a Remote Desktop Connection (via LAN)
HMI:
Based on the “ControlDesk” software installed in the dSPACE box
Overview of the AC Grid interface:
The system is made of 3136 Li-ion cells that are arranged into two pairs each connected to a 120kVA inverter. The output of the two inverters is connected to an isolation transformer that is connected with the power system of the Sackville Building. The system is available to contribute to the ancillary services of the low voltage distribution grid.
ANCILLARY SERVICES (<30s response time for voltage control, frequency response):
Yes, full charge to full discharge in at least <0.7s
RESERVE (>30s response, at least 30 min duration):
Yes, can source or sink 240kW for 30 minutes, depending on initial state-of-charge
INTRA-DAY PEAK SHIFTING (balancing demand/supply of electrical and thermal within day):
Yes, can deliver 180 kWh of energy at ±240 kVA
INTER-DAY LEVELLING (balancing over days, especially considering low wind events):
Yes, can deliver 180 kWh of energy at ±240 kVA
SEASONAL ELECTRICAL PEAK SHIFTING (storing electrical energy in summer, discharging in winter):
Yes, capable of providing Triad Avoidance services
SEASONAL THERMAL PEAK SHIFTING (storing hot/cold thermal energy between seasons):
No
BLACK START:
Yes
UNINTERRUPTABLE POWER SUPPLY:
Yes, can store 180 kWh of energy at negligible self-discharge rate if system is in energy saving mode (batteries disconnected and BMS powered off).
CUSTOMER BALANCING:
?